10
TURNING THE BATTER PACK ON/OFF
The Battery Pack will turn on or off automatically when a device is plugged
into or disconnected from the Battery Pack.
If the Battery Pack stops
functioning, reconnect the AC Power Supply to the Battery Pack to reset
the internal circuitry.
INITIAL BATTERY USAGE
Before using your Battery Pack for the first time be sure to charge it fully
using AC power (a wall outlet).
During the initial charge, the Battery Pack may indicate that charging is
complete after just 10 or 15 minutes as the Battery Pack is already charged
before it leaves the factory.
USING THE BATTERY PACK INSIDE THE CARRYING CASE
The Carrying Case of the Battery Pack was designed with a clear access
window which allows you to use and/or charge the Battery Pack while it is
inside of the Carrying Case.
Place the Battery Pack in the Carrying Case with the Control Board
facing toward the clear access window.
If you are using the Battery Pack in the dual configuration, place both
Battery Packs in the Carrying Case with the Control Boards facing toward
the clear access window.
Pull open the flap of the clear access window.
Insert the appropriate connection cord (DC Power Pigtail Cord, DC Input
Cord, Power Converter Cord, or AC Power Supply Cord) to the DC Out
Jack of the Battery Pack.
Note:
The connection cord used will depend upon whether you are
charging or using the Battery Pack.
See pages 11-20 for connection
configuration information.
G
etting
S
tarted
