Assembly Procedure
A
minimum of two people is required for the assembly of the 850/1450 tower. Only
climb the tower from the inside using the ladder section.
Always start building with the smallest height frames at the base of the tower:
For even platform height towers (2
.2
m/4
.2
m/6
.2
m
etc
)
ALWAYS
start with a 2 RUNG
FRAME.
For odd platform height towers (3
.2
m/5
.2
m/7
.2
m
etc
) ALWAYS start with a 4 RUNG
FRAME.
For
even
intermediate
platform
height towers (2.
7
m/
4
.
7
m/
6.7
m
etc
) ALWAYS start with
a 3 RUNG FRAME.
For odd intermediate platform height towers (3.7m/5.7m/7.7m etc) ALWAYS start with
a 2 RUNG FRAME.
Insert adjustable leg assembly (with castors
or base plates) into the base of
the
rung
frame
.
R
epeat
for the
rung ladder frame.
Lock all castor wheels.
Attach one horizontal brace to the inside of
the rung frame just above the bottom rung,
claws facing outwards. This frame will now
be self-supporting.
Position the ladder frame as shown.
Connect the other end of the horizontal
brace to the ladder frame. Now connect the
frames using a second horizontal brace on
the opposite side locking
it
downwards,
this will square the tower.
Check
the
tower is vertical
by u
sing
a
spirit
level
and adjust as neccessary.
PLEASE TAKE NOTE
Always climb from the inside of the frame – never the outside.
When working on the platform never overreach
.
1
2
3
8
The example below shows how to assemble a 6.2m working height (4.2m platform
height) tower:
