BPC T-3100P, User Manual

Page: 30 / 41

26
5.4 Connecting The UPS Power Cables
CAUTION! Only qualified personnel should install or service UPS / batteries.
The ac input to the UPS should be supplied by a separate line from the ac distribution board.
The input/output cables can be sized to suit the modules rating according to the table below.
The connections of the electric panel should be supplied by grounded outlet. Cables enter the UPS modules via
entry panels in the base of cabinet. All control cables should be screened and run in a separate trunking to the
power cables.
The input/output cables can be sized to suit the modules’ rating according to the table below.
WARNING !!! :
This is a product for restricted sales distribution to informed partners. Installation
restrictions or additional measures may be needed to prevent disturbances.
WARNING !!! : External battery cables must be shielded.
Figure 5-1 Installation Diagram
UPS
(KVA)
3 Phase Input/Output
100 - 120 150-160-200
L 1850 1935
P 800 870
H 1600 1730
X (min) 250 250
NOTE :
All the dimensions are in mm.
H
-
L -
X
P-
1850
1
6
0
0
800