(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
5.
The system will start the encoding mode after a few seconds.
6.
Lower the tone arm to start playback of the record. During encoding, the USB or SD
icon will be flashing on the display.
7.
To finish encoding, press the stop
button. The display will show “END” and return to
PHONO mode.
NOTE
:
The recording speed is 1:1. Recording will take as long as playing the record.
The recording format is preset at MP3 bit rate 128 kbps.
Cassette Operation
1.
Cassetter Button Indicators
2.
Cassetter Button Control
a) RECORDER-------Copy RADIO / PHONO /AUX IN / CD / USB / SD to TAPE
b) PLAYER--------------Play tape tracks
c) REVERSE
d) FORWARD
e) STOP/EJECT--------1
st
push – Cassette function stop, 2
nd
push open cassette door
f) PAUSE-----------------Pause when cassette in PlayBack mode.
3. Cassette PlayBack Control Operating
1) TAPE Play:
a) Function Choose to “TAPE” mode---Push “EJECT” key under tape----Open cassette
tape door-----put your tape into cassette dock----Manual close the tape door –Press
“PLAYER” Key ------ To adjust the volume level for your preference, turn the volume knob
to the right or left
b) Press “PAUSE” button once to stop playing, press it again to continue
C) When TAPE tracks play ending, “PLAYER” Key up automatically.
2) REVERSE
----------When Cassette Stop -------Press “REVERSE”.
