REPAT
CD/USB/SD PlayBack
press and hold this button to one & All repatedly
Important notes
The system can detect and read files in MP3 / WMA format only via the USB port or SD
card slot.
You can connect an MP3 player to the system via the USB socket, however, some MP3
players may not be able to play via the USB socket. This is due to variances in the
MP3 encoding format; it is not a malfunction of the system.
There are numerous USB and SD device producers and their products vary in solution
and format. We therefore cannot guarantee that this unit will support all USB and SD
devices from every brand.
This system supports SD cards up to 8GB.
MP3 / WMA track format requirements:
MP3 bit rate: 32 kbps~256 kbps; WMA bit rate: 32 kbps ~ 320 kbps.
Programming tracks for playback
Up to 64 tracks can be programmed for MP3 / WMA file playback in any order.
Before programming, however, be sure the system is in STOP mode.
1.
Set the function selector to CD/ USB/SD mode, then press the stop
button.
2.
Press the program
PROG
button, MEM will be flashing on the LC display, and it will
indicate the program number and digits for the track number to be programmed.
3.
Press the
SKIP UP
or
SKIP DOWN
button to select a desired track.
4.
Press the program
PROG
button to store the track into the memory.
5.
Repeat steps 3 and 4 to enter additional tracks into the memory.
6.
When all desired tracks have been programmed, press the
PLAY/PAUSE
button to play the tracks in the assigned order.
7.
To cancel programming, press the STOP button twice.
Copying of MP3 / WMA files
The system allows you to copy files from USB to SD/MMC or vice versa. You can copy a
single file/track, a folder of files/tracks, or all files/tracks on the storage medium.
Copying a single file/track
1.
Insert a USB storage device and SD/MMC card, then select USB/SD mode (as
described previously).
