8.
FM reception
: the receiver has a built-in FM wire antenna hanging at the rear cabinet. For
best reception, completely unravel and extend this wire.
9.
When you have finished listening to the radio, turn the volume knob in a counterclockwise
direction to switch the unit off. Unplug it from the power supply if you are not going to use it
for a while.
FM and FM-stereo mode
•
FM mode:
use the radio band selector to select the FM band. Programs are received in mono
mode. Use this mode when stereo reception is weak.
•
FM-Stereo mode:
use the radio band selector to select FM-ST for receiving stereo programs.
Once a stereo signal is received, the ST icon will light up on the display.
The record player
IMPORTANT!
When using the turntable:
•
Make sure to remove the stylus protector, as illustrated on the right. (It should easily slide off
the stylus assembly.)
•
Make sure to unclip the tone arm lock before use and to secure it again after use.
Playing a record