background image

 

To remove a memory card, press the memory card inwards and then release it. The card will 

be released (partially ejected) and you can remove it by hand.  

  

FAQs 

 

If you are experiencing problems with your USB Turntable, check in the section below whether 

there are any quick and easy checks you can do that may help you solve the problem. If you 

cannot solve the problem by yourself, contact our after sales support line for advice. Do not 

attempt to open, repair or modify the equipment yourself. 

Problems with sound 

 

 

 

Clockwise rotate the power/volume knob to increase the volume.  

 

Make sure the unit

s power cord is connected to an appropriate electrical outlet.  

 

Make sure the wall socket is switched on.  

 

Make sure the function switch is set to your desired function: PHONO, USB/SD, TUNER, AUX.  

 

When playing records, make sure you have selected the correct speed (33, 45 or 78 rpm).  

 

When playing a CD via the AUX IN connection, make sure the cable is firmly connected, all 

controls on the CD player are properly set, the disc tray is closed and the disc is clean and 

undamaged.  

 

When playing music from a USB device (or SD/MMC card), make sure the memory device is 

properly inserted in the USB port (SD/MMC card slot) and the correct MODE is selected.  

Problems with radio reception

 

 

 

Make sure you are in an area that can receive signals for your selected radio station.  

 

If AM reception is weak, rotate or reposition the equipment to improve reception.  

 

If FM reception is weak, try the following to improve reception:* Completely unravel the wire 

aerial at the back of the cabinet.* Slightly move the wire aerial for better reception.* If none of 

these measures improve stereo reception, try the same station on the FM (mono) band.  

 

Try moving your radio to an alternative location to see if the reception improves.   

 

Check that you do not have other electrical equipment too close to your radio, which may 

cause interference.

 

 

Summary of Contents for BT-37WT-C


















Reviews: