background image

12 

 

Deleting all files/tracks

 

1.  Insert  a  USB  storage  device  and  SD  card,  then  select  USB/SD  mode  (as  described  previously). 

When the system has recognized the device, press the stop button. 

2.  Press  the  delete 

DEL 

button:  “ONE”  will  be flashing  on  the  display.  Press the 

SKIP  UP 

or 

SKIP 

DOWN 

button to select “ALL” on the display. Press the delete 

DEL 

button again to confirm. 

3. While the system is deleting the files/tracks, the USB or SD icon will be flashing on the display until 

the deletion is complete. 

NOTE: 

Pressing the delete 

DEL 

button will completely delete all files/tracks on the USB device or SD 

card. 

Removing the USB device / SD card

 

•  First  move  the  function  selector  to  another  mode  (tuner,  phono,),  then  turn  the  volume  knob 

counterclockwise to turn off the power. 

• To remove a USB device, pull it out of the USB port. 
•  To  remove  a memory  card,  press  the  memory  card  inwards  and  then  release  it.  The  card  will  be 
released (partially ejected) and you can remove it by hand. 

 

 

Bluetooth input -Receiver   

Listening to IPhone (or other Bluetooth input devices)

 

1. Turn the volume knob clockwise to turn the equipment on.   

2. Use the function selector to select AUX/TAPE/BT IN mode. 

3. Press” Mode /BT IN” on panel or remote for 2-3 seconds. LED indication Red color and flashing. 

When succeed in connecting, LED color in red and stable. 

4. Activate the Bluetooth function in your Bluetooth device (such as Mobile Phone); the device will 

enter to Bluetooth searching automatically, if not, tap the relate selection to manually enter to 

searching mode.   

5-

Your Bluetooth device show “Boytone Turntable” in list, and then select it for pairing.   

6- You can start to music play on your Bluetooth device when the device is in paired and show 
connected.    (If not, select / tap the relate menu and choose “connect” to connect the Bluetooth 
turntable manually. It’s depended on your Bluetooth device version and designed function.) 
7- If an external audio device is connected to the AUX IN socket, playing of the auxiliary device takes 

priority over Bluetooth input and cassette playback   

 

Bluetooth input encoding (Same as Aux input encoding)

 

1. When playing in Bluetooth input status. 

2. Press the record REC button, it will take 3 - 4 seconds to read the memory device, then the USB or 

SD icon will be flashing on the LC display. 

 

 

 

 

 

Summary of Contents for BT-22-B















Reviews: