Boyd night air, Owner'S Manual

Page: 5 / 19

5
Connect hand controls to processor
Attach one hand control to the “LH” connector on
the side of the processor. Attach the other hand
control to the “RH” connector on the side of the
processor. As you are standing at the foot of the
bed, facing the head of the bed, “LH” refers to the
left side of the bed and “RH” refers to the right
side of the bed. (The hand controls are already
permanently connected to the 6003 processor)
5
Plug processor into a UL
®
listed surge
protector
(UL
®
1449, 330 volt, 700 joule or higher)
Even though you can plug the processor into
a grounded three prong outlet, we recommend
using a surge protector to guard against
unexpected power surges.
Note:
Your 20 year limited warranty does not
cover damage due to a power surge, regardless
of the source.
6
Enjoy you new Night Air
®
Sleep System
The air cores of your Night Air Sleep System
are fully inflated upon arrival. However, you may
want to engage the auto fill button (if available)
to reset each side of the bed to 100%. Once set-
up is complete, place the hand controls in the
convenient side pockets, and make up your bed
with deep pocket bed linens.
7