Plug the power cord into the power supply as shown.
To prevent damage to the Power Supply (Part D), please
ensure the Power Supply is placed outside the perimeter of
the adjustable base frame.
STEP 2: Remove the bed from the box
STEP 1: Remove packing materials
Remove the bed base from the box keeping the bottom of
the base facing upwards. Install the 4 legs to the four
corners as shown. Tighten the legs by hand. Ensure the
legs are secured tightly. (Note that the legs are adjustable by
unscrewing the small part of the leg from the larger part of
the leg. This allows you to adjust the height of your bed).
P.S. Install the headboard brackets at the same time if
attaching to a headboard. See the page 14.
Carefully turn the base over using two people. Do not lay the
base on its side to prevent damage to the side button, fabric
or legs.
STEP 4: Connect power supply
STEP 3: Overturn the bed base carefully
http://www.boydspecialtysleep.com
Put the bed base in a desired place with the bottom of the
box facing up. Remove box cover, take out all of the packing
materials and put aside, Make sure not to puncture the bed
with any sharp objects.
Installation