Boyd Flex Base 6000 User Manual Download Page 4

The lift motors are not designed to operate continuously for more than (2) minutes in an (18) minutes time period.
Attempting to circumvent or exceed this rating will shorten the life expectancy of the product and may void the
warranty.

This product is not rated to support weights exceeding 850 pounds including the mattress and bedding. The base will
structurally support this weight, provided it is evenly distributed across the bed base. The adjustable base is not
designed to support or lift this amount in the head or foot sections alone. Exceeding this weight restriction could
damage the bed and/or cause injury and will void the warranty.

http://www.boydspecialtysleep.com

To prolong the life of your fabric, protect it from direct sunlight whenever possible. For spot cleaning, wipe area with a
light damp sponge or vacuum with a soft brush attachment to remove particles. Keep at a minimum of 30cm (12
inches) away from direct heat sources. For deeper cleaning, blot liquid spills with a clean dry cloth. Wipe with a clean
cloth dampened with warm water. Do not moisten excessively. A soft bristle brush may be used to remove ingrained
soil. Avoid scratching by brushing gently. Wipe with a clean cloth dampened with warm water to remove residues. Dry
in a shaded area away from direct heat. If persistent marks remain visible after cleaning, seek professional advice.

Safety Instructions

FCC Compliance:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

To comply with the FCC RF exposure requirements, no change to the antenna or the device
is permitted. Any change to the antenna or the device could result in the device exceeding
RF exposure requirement an void user's right to operate the device.

Radio Frequency: 2.4GHz

Product Ratings:

Weight Limits:

Acoustics:

The massage function will emit a noticeable tone during operation. As the massage intensity level is increased, the
tone will intensify. The volume of this tone is directly related to the location environment. For example, when
demonstrated in a show room, the surrounding environmental noise will cover some of massage noise. However,
when installed in a home setting with wooden floors, carpeted or not, the massage volume will be more noticeable. In
normal base operation, the legs support of the base will create a contact noise with floor. When entering, exiting, or
shifting weight on the base, this contact noise may be louder as the legs make contact. This is normal.

Fabric Care:

Summary of Contents for Flex Base 6000



















Reviews: