NOTE
:
1) Please adjust the monitoring audio volume of RXD
before recording.
Connecting the transmitter and the Receiver
23
1.Turn on the transmitter and plug the receiver
into smartphone.
2. Long press the pair bottom of receiver with pair
pin, the indicator of receiver will flash quickly
when entering paring mode.
Before leaving factory, the connection of transmitters
and receiver will be established.
If transmitters and receiver disconnect, please follow
below steps:
3.Long press the pair button on the side of the
transmitter entering the pairing mode.
4.When the transmitter and receiver connected, the
light of receiver stays blue, and transmitter flashes
every 2.5 seconds.
Otherwise, the light of receiver and transmitter will
flash continually every 1 second, then try 1-3 steps
again.
Summary of Contents for BY-WM4 PRO
Page 1: ...BY WM4 PRO Dual Channel Digital Wireless Microphone...
Page 19: ...18 2 Push the cold shoe mount on the position 3 Mounted receiver onto camera hot cold shoe...
Page 20: ...19 BY WM4 PRO RXD 2 4GHz Wireless Receiver For iOS devices...
Page 25: ...24 BY WM4 PRO RXU 2 4GHz Wireless Receiver For Android and other Type C devices...