Operating voltage
DC 12V
Operating Current
9.2A
Power
70W
2.Product interface description
Figure 1 Rear panel interface diagram
The rear panel interface is defined as follows
：
SN
Interface
Instruction
1
DC-12V
Device power interface
2
USB3.0
Connect USB mouse, USB flash drive, mobile hard drive, etc.
3
NET
1000M network port for device networking
4
USB2.0
Connect USB mouse, USB flash drive, etc.
5
HDMI-OUT-2
HDMI signal output, output screen is the guide
interface or
PGM (software can be set)
6
HDMI-OUT-1
HDMI signal output, output screen is the guide interface or PGM
(software can be set)
7
HDMI-IN-1-
5
HDMI signal input, support 2/3
/5
channels(depend on model)
8
LINE IN/OUT
MIC IN
2 CH Stereo input (LINE IN1/LINE IN2), 1 CH Stereo output interface
(LINE OUT1) and 1 CH Microphone Mono input
9
Monitor
3.5mm headphone monitor interface, monitor PGM channel sound
10
COM/Console
RS232/RS485 control serial port
3. Recorder debugging
1
）
Preparation before debugging
Before installing and debugging the recorder, please prepare the following:
1) The network cable and switch can also be connected to the Hub. It is recommended to use the switch
