4.3.2.1 PTZ
1.
Enable PTZ---
to enable the camera control function
2.
Protocol--S
upport VISCA,PELCO-P,PELCO-D protocol
3
.COM--
The interface for PTZ camera or camera tracking controller connect to conference recorder,
support RS485 and RS232,corresponding the RJ45 port.
4.
Baud Rate---
support 2400/4800/9600 and set it according to the specification of the camera.
5.
Address Code
-- The address code should be the same as the camera setting.
6.
Speed
---Set the speed of camera turning.
7.
Preset
-You can select the 1 to 8 preset and extreme closeup, closeup, close-range, mid-range,
perspective. The preset of extreme closeup is 11, closeup is 12, close-range 13, mid-range
