27
COMPUTER INPUT
Selects area displayed with this projector. Select the resolution at
Display area dialog box.
Display area
Adjustment of horizontal area displayed with this projector. Press
POINT LEFT/RIGHT to decrease/increase value and then press
SELECT.
Display area H
Adjustment of vertical area displayed with this projector. Press
POINT LEFT/RIGHT to decrease/increase value and then press
SELECT.
Display area V
Press POINT LEFT/RIGHT to switch Full screen function to “On” or
“Off.” Set “On” to resize the image with 4 x 3 aspect ratio to fit the
screen.
Full screen
Reset
Store
Closes PC ADJUST MENU.
Quit
Other icons operate as follows.
3
To store adjustment parameters, move red frame pointer to
Store icon and then press SELECT. Move red arrow pointer to
any of Mode 1 to 5 that you want to store to and then press
SELECT.
Reset all adjust parameters on adjustment dialog box to previous
values.
Mode free
Vacant Mode
Shows values of “Total dots,”
“Horizontal,” “Vertical,” “Display
area H,” and “Display area V.”
Store icon
Mode free icon
Close this dialog box.
To store adjustment data.
To clear adjustment data.
To clear adjustment parameters previously set, move red frame
pointer to Mode free icon and then press SELECT. Move red
arrow pointer to the Mode that you want to clear and then press
SELECT.
Display area
Press POINT LEFT
/RIGHT to adjust value
and then press SELECT.
Press SELECT at Display area
icon and Display area dialog box
appears.
This Mode has parameters being stored.
NOTE : Fine sync, Display area, Display area H, Display area V and
Full screen cannot be adjusted when “RGB”, “1035i
(HDTV)”, “1080i50(HDTV)” or “1080i60 (HDTV)” is selected
on PC SYSTEM Menu (P23).
