BOXLIGHT MimioClarity Technical User Manual Download Page 13 | Manualshive

Page: 13 / 43

BOXLIGHT MimioClarity Technical User Manual Download Page 13

Page | 13

External Device Line Input

An MP3 player or other type of audio device may be plugged into the line
input on the teacher microphone. The audio from the external device will
broadcast through the MimioClarity amplifier.

Student Microphone

Pairing the Student Microphone

High Frequency OFF: (default setting when shipped)

1.

Press the Pairing/Power button

on the MimioClarity amplifier. It

will start blinking green.

2.

Press the Power button

and the Push to Talk button on the student microphone at the same

time, then release. The student microphone Pair/Connect button will start blinking green and the
power button on the amplifier will start blinking green.

High Frequency ON:

1.

Make sure the amplifier has power; the microphone button on the amplifier will be red.

2.

Press the Power button

on the student microphone. The button will turn green.

3.

Press the Pair/Connect button

and the Push to Talk button on the student microphone at

the same time, then release. The student microphone Pair/Connect button will start blinking
green, and the Power button on the amplifier will start blinking green.

MIC

LINE

Pairing/Power Button

«
...
11
12
13
14
15
...
»

Summary of Contents for MimioClarity












































Reviews:

No comments