BOXLIGHT CD-753z, User Manual

Page: 26 / 53

Projector
2 5
.English.
LED COLOR STATUS MEANING
Red Flashing Error messages as the following:
1. There is a problem with the projector fan - the
projector cannot start up.
2. The projector lamp failed to ignite after 3 attemps.
3. The lamp has reached its end of life and must be
changed soon. (The LED flashes red around 1
minute before end of life) The lamp will continue to
operate until it fails completely. Change the lamp
and reset the lamp life counter(see P.44).
Orange Solid In Standby mode, the projector’s 15-pin D-SUB acts as
a system converter. User could select any different input
device to convert to PC monitor signal. User can press
the BY-PASS to select the projector by-pass mode (15-
pin D-SUB in and direct throughout to the15 pin D-SUB
for other monitor or equipment), in the throughput mode
the LED indicator stays orange. (lamp off)
* For VGA/DVI data source input only