Fixing parts
of wall
Expansion
screw
Guid orbit
Axis of long pin
Door connector
Axis of
short pin
Door steel
scimitar
M6x20 bolt
Expansion screw
Holes steel
Connector “II”
M6x25
Attack screw
Fixing and hoisting door opener
Assembly and the use of clutch
Preparation of Garage Door for opener.
First step, open and close the door manually, the door should be running
smoothly, and door is well balanced.
Do not install opener on Garage Door, unless the door runs smoothly in manual
operation.
Programming process
Set up opening limit of door:
State of lamp:
Instruction:
Always
bright
Lamp Dark
No press Press Always press
State of buttons:
Press button “P” The
number 2 LED will flash.
Push and hold the + button
to bring the door to the
desired UP position.
Press P button once, lock
the UP limit, meanwhile
LED 4 will flash and enter
the next program.