treatment head than other items, so its continuous working time should not
exceed 40
minutes each time, otherwise it will burn treatment head.
Notes:
1, the frequency should not be too high,usually adjust it to 3-4
2, the voltage should not be too large. The black carbon gel has very strong absorption of light. So
if the voltage is too high, it will hurt the skin.
more sensitive to light black toner, voltage too easy to burn the skin
3, Before operating, don
’
t apply too thick carbon gel, just a thin layer is ok, and
it must be completely dry before blasting.
4, Continuous working time of the machine should not too long, must be turned
off after 30 minutes continuous work to rest , and must be filled with water before operation,
otherwise it will burn out the machine and handpiece.
5. Black doll probe must be removed when moving machine, so as to avoid breaking the lens
inside the probe.
16.5.
t
he pos
t
ope
r
a
t
i
ve ca
r
e
A: To avoid to pencil the eyebrows in bleeding skin.
B: To avoid to wash the treated area within 48 hours after the treatment
C: To avoid the insolation and do good skincare job.
D: To avoid to take the spicy food, seafood, tobacco, and alcohol in 3--7 days after treatment.
E: To take the oral antibiotics after the treatment and use the erythromycin ointment to skin
during the convalescence (over the 72 hours after treatment) for the customers, who is bleeding
more and has the red and swollen skin after receiving the surgery.
Summary of Contents for HL-402
Page 1: ...E light HL 402 The Operation Manual ...
Page 16: ... Figure 8 9 2 OPT E ...
