background image

2

8027823.081520.A

Service Procedures

Important Safety Instructions 

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and 

understand all Warnings on this machine.

Before servicing or using this equipment, obey the following warnings:

 Read and understand the Service Manual before working on the machine.  Failure to obey the instructions and safety warnings 

could cause injury to the service technician or bystanders.

•  Keep bystanders and children away from the product being serviced at all times.

•  Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

•  Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving 

these components. Do not try to do heavy or awkward steps on your own.

•  Use only replacement parts and hardware that are supplied or approved by Nautilus. Failure to use Nautilus-approved replacement parts can 

adversely affect the safety and functionality of the equipment creating a risk to users and will void the warranty.

•  Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or 

replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, 

contact Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.

•  Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety and will void the warranty.

•  Do not put the machine back in service until all shrouds, instructions, warning labels and correct functionality have been verified and tested for 

correct performance.

NOTICE:  

This document provides important safety instructions, adjustments, and general troubleshooting information for the maintenance of the Bowflex

 SelectTech

 2080 

Barbell with Curlbar. 

If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside 

US/Canada). To find your local distributor, go to: www.nautilusinternational.com

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand 

all Warnings on this machine.

Important Safety Instructions and General Troubleshooting 

Information for the  Bowflex

 SelectTech

  

2080 Barbell with Curlbar

Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed

in China | © 2020 Nautilus, Inc. |  Bowflex, the B logo and SelectTech are trademarks owned by or licensed to Nautilus, Inc., which are registered or otherwise protected by common law in the United States and other countries. | 

ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

Summary of Contents for SelectTech 2080
















Reviews: