Bowflex BodyTower, Assembly Manual

Page: 4 / 16

Specifications
Before Assembly
Select the area where you are going to set up and operate your equipment. For safe operation, the location
must be on a hard, level surface. Allow a workout area of minimum 123” x 123” (3.1m x 3.1m).
Follow these basic points when you assemble your equipment:
1. Read and understand the “Important Safety Instructions” before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the
left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, carefully lift and look through the bolt holes to help insert the bolt through the
holes.
5. The assembly requires 2 people.
76.9”
195.4 cm
49.7”
126.3 cm
51.2”
130.1 cm
4