17
Bowflex Revolution
™
Service Manual
5. Remove Shroud.
5-1. Use a phillips head screwdriver to remove
the five screws securing the shroud
5-2. Remove the Shroud and set aside.
Shroud
Replace Cam Assembly (continued)
Maintenance Procedures
6. Remove Tension Shaft From Cam Assembly.
6-1. Use a 7/32”allen wrench to loosen the eight bolts
on the Tension Shaft Holder. ( Figure A)
6-2. Pull the Tension Shaft through ( Figure B ) until it
clears the Cam Assembly ( Figure C ) being replaced.
Figure A
Figure B
Figure C
Tension Shaft Holder
Tension Shaft
Cam Assembly
