Bowers DigiMic, Instructions Manual, Page: 12 / 72

12
6. Standby
This reduced consumption mode works without the loss of the reference position. Standby mode activates
after 10 minutes of no use, or by holding the [SET] button until the screen goes blank.
Standby mode deactivates on detected movement, button pressing or communicating with Bluetooth de-
vices.
7. Full Switch OFF
To switch the device fully off, press and hold the [SET] button until the device shows (--OFF--).
In this state no data is maintained and therefore the reference position is lost. The (--SET--) message will be
displayed again during next use (See switching ON).