![background image](http://html1.mh-extra.com/html/bowers-and-wilkins/ct-800/ct-800_instructions_2797598003.webp)
9/30/2005 - Page 3
•
To replace the midrange driver, using a large flathead screwdriver or the
Midrange Torque Driver tool from the 800D series toolkit remove the large silver
screw from the rear of the head assembly. Be careful when removing this to
ensure the midrange driver does not fall out of the head assembly as this screw
attaches directly to the rear of the midrange driver basket. When the midrange
driver has been removed, the new drive unit can be installed and reassembled
following these directions in reverse. Polarity for the midrange driver
connections is Brown positive, Blue negative.
•
To replace the tweeter assembly, remove the large silver midrange screw as
noted in the previous step, and also remove the 4 allen screws located on the
back of the midrange head assembly.
•
Once all 4 allen screws and the silver midrange screw have been removed, the
midrange head assembly can be gently pulled apart.