Bowens Esprit 1500 Operating Instructions.
- 3 -
1. General
Welcome to the world-wide family of Bowens flash equipment users, and
congratulations on selecting the latest compact flash in our range. The Esprit
1500 includes a unique combination of features not found in other monoblocs:
•
Power selection system, with easy-to-use selector switch and digital display
allowing 1,2 or 3 capacitor banks to be combined to deliver maximum power
outputs of 500, 1000 or 1500 Ws.
•
Auto power dump giving access to lower power selections without the need to
manually dump a higher flash power first. The digital display provides an
indication of the state of the power dump by blinking.
•
Audible flash ‘Ready’ confirmation.
•
650 W halogen modelling lamp.
•
Built-in fan cooling system.
•
Uncoated flash tube with separate UV coated glass dome fitted as standard
over the modelling lamp and flash tube for safety. Clear and frosted domes
are also available as accessories for special applications.
2. Safety
Notes
•
The Esprit 1500 must not be used in an environment where moisture or
flammable vapour is likely to come in contact with the unit.
•
A cover glass dome should always be fitted during use.
•
A fire hazard exists if flammable materials are placed in close proximity to
the flash tube, modelling lamp or glass dome when the unit is in use.
•
Switch off and disconnect supply before changing fuse, modelling bulb,
flashtube, glass dome or reflector.
•
The charging and modelling circuitry is protected by a 10 A 20 mm fuse
mounted on the rear panel (Fig.1). Always replace with a fuse of identical
rating.
•
Do not restrict slots in case when in use.
•
Care must be exercised when handling equipment that has been in use. The
reflector and front end of the unit can become Very Hot.
•
Due to the high voltage/high energy used in the Esprit 1500, servicing must be
carried out by a qualified, authorised Service Centre.
3.
Contents Of Carton
1.
Esprit 1500 (Fitted with flashtube and modelling lamp)
2.
Sync. Cord
3.
Mains Lead
4.
Instructions