Remove Transmitter battery cover and
battery. Remove battery terminal cover and
connect PP9 battery. Replace battery cover
BOWDENS
Bowden Bros Ltd - Cable Core Identifier Operating Instructions – page 3.
Connect the leads at the remote end in any order. Push the
button on the Transmitter. In this example the RED LED is ON
The Yellow LED is OFF. The GREEN LED always lights. Now follow
the instructions on the back of the Transmitter
The instructions have told us to swap the YELLOW and BLUE
leads. Press the button again and the RED LED is OFF, the
YELLOW LED is ON. Refer to the instructions again.
The instructions tell us to swap the RED and BLUE leads. Press
the button and both the RED LED and the YELLOW LED are lit.
This means the phase rotation is now correct.
