Bovie Aaron 940, User Manual

Page: 12 / 146

11 User’s Guide • Aaron 940
™
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
Separation distance according to frequency of transmitter in metres (m)
150 kHz to 80 MHz
d =
1.2 P
80 MHz to 800 MHz
d =
1.2 P
800 MHz to 2.5 GHz
d =
2.3 P
0.12 0.12 0.23
0.38 0.38 0.73
1.2 1.2 2.3
3.8 3.8 7.3
12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation
distance
d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
Guidance and manufacturer’s declaration – electromagnetic emissions
The Aaron 940™ is intended for use in the electromagnetic environment listed below. The customer or the
user of the Aaron 940™ should assure that is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF Emissions CISPR 11 Group 2
The
Aaron 940™
must emit
electromagnetic energy in order
to perform its intended function.
Nearby electronic equipment may
be affected.
RF Emissions CISPR 11 Class A
The
Aaron 940™
is suitable for
use in all establishments other
than domestic and those directly
connected to the public low-
voltage power supply network that
supplies buildings used in
domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions
IEC 61000-3-3
Complies
Recommended separation distances between portable and mobile RF
communications equipment and the Aaron 940™.
The Aaron 940 is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the
Aaron 940™
can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the
Aaron 940™
as recommended below, according to the maximum
output power of the communications equipment.