2. Press the
DISC TARGET
touch pad to “lock-in” the programming.
The blinking arrow under
IRON/FOIL
disappears and
IR
appears in the
TARGET
readout (indicating that the detector
is set to accept all metals, including all levels of iron) as
shown in the following diagram.
▲
To select PRESET targets
The Time Ranger™ has three
PRESET
modes:
1. Perform the steps described in
Turning the Detector ON
section of
this manual.
2. Press the
DISC TARGET
touch pad.
A blinking arrow appears under
IRON/FOIL
in the
Probable
Target ID
fields, meaning the detector is ready for programming.
3. Press the
PRESET
touch pad once to select
PRESET 1.
The blinking arrow under
IRON/FOIL
is replaced by an
R.
4. Press the
PRESET
touch pad twice to select
PRESET 2.
An
R
appears under
PULL TAB
in the
Probable Target ID
fields
.
5. Press the
PRESET
touch pad three times to select
PRESET 3.
An
R
appears under
Z-1¢/S-CAP
in the
Probable Target ID
fields
.
PRESET 1
Rejects all levels of iron and aluminum foil.
PRESET 2
Rejects pull-tabs, iron and all objects rejected in
PRESET 1
mode.
PRESET 3
Rejects zinc pennies, screw-caps, pull-tabs, aluminum, other similar
objects, and all objects rejected in
PRESET 1
and
PRESET 2
modes.
SNIFF
ALL METAL
SMART
TRAC
PRESET
DISC
TARGET
POWER
ON/OFF
BLANKER
15