5
IMPORTANT:
Always use
ALKALINE
batteries only.
Do not use heavy duty batteries.
Always remove the batteries for prolonged storage.
CHECK THE BATTERIES
if your detector exhibits any of the following
symptoms:
●
1
The unit does not turn on.
●
2
Low speaker volume.
●
3
Unit beeps continuously or erratically.
The LOW BATTERY indicator will come on and stay on if the batteries
are discharge. You may notice erratic beeping if using with LOW
BATTERY illuminated.
IMPORTANT:
Your Lone Star metal detector requires two 9-Volt
ALKALINE batteries.
Follow these steps to install the batteries.
●
1
Carefully remove the battery compartment door by pressing the release
clip on the right side of the door.
●
2
Snap one battery onto each of the terminals and place the batteries in-
side the com-
partment.
Insert booth of
the batteries
with terminals
facing outward.
●
3
Replace the
compartment
door by carefully
inserting oppo-
site side of clip
first. Then press
down on clip
side until battery
door snaps into
place.
BATTERIES
Release
Clip
Both Batteries
teminals
facing out
