background image

9

SUMMARY OF OPERATING MODES

I. NO-MOTION ALL METAL MODE

• Deepest Seeking Mode
• No motion is required
• All metals will be detected
• One tone only
• Manual Ground Balance:  User must tune and retune with the GroundTrac button.

To Operate:

1) Press All Metal button.
2) Press GroundTrac button, and re-tune as necessary.

Applications:

Pinpointing Objects located in motion modes
Relic Hunting
Cache Hunting

Household applications:  finding lost items, locating property markers

II. MOTION ALL METAL MODE

• Motion Required
• All metals will be detected
• Three-tone Audio Target Identification

To Operate:

1) Press DISC button.
2) Keep Disc/Notch Knob 100% counterclockwise.
3) Reduce Sensitivity Knob in event of false signaling.

Applications:

Relic Hunting
Cache Hunting
Household applications:  finding lost items, locating property markers

III. DISCRIMINATION MODE

• Motion Required
• Three-tone audio target identification
• Disc/Notch Knob allows user to eliminate unwanted items.
• Discrimination is a fixed-start-point system.  Items are cumulatively eliminated.
• As you turn the knob farther clockwise, more objects are eliminated, including the first items

eliminated.

• Reduce Sensitivity if the detector emits false or non-repeatable signals.
• Automatic Ground Balance:  detector automatically adjusts to ground mineralization as you

sweep the coil.

To Operate:

1) Press DISC button
2) Move Disc/Notch Knob to desired setting.
3) Reduce Sensitivity Knob in event of false signaling.

Applications:

Coin-Shooting
Jewelry Hunting

IV. NOTCH MODE

• Automatically eliminates all ferrous objects.
• Disc/Notch Knob allows user to eliminate medium-tone trash items, but retain low and

high-tone valuables.

To Operate:

1) Press NOTCH button.

Other Operations and Applications:  same as Discrimination Mode.

V.  AUTONOTCH MODE

• Automatically eliminates all ferrous objects.
• Automatically eliminates most pull-tabs.
• Disc/Notch Knob allows user to eliminate medium-tone trash items, but retain low and

high-tone valuables.

To Operate:

1) Press AUTONOTCH button

Other Operations and Applications:  same as Discrimination Mode.

Summary of Contents for PIONEER 505





















Reviews: