5
BATTERIES
IMPORTANT:
Always use
ALKALINE
batteries for optimal performance.
Always remove the batteries for prolonged storage.
CHECK THE BATTERIES
if your detector exhibits any of the following
symptoms:
●
1
The unit does not turn on.
●
2
Low speaker volume.
●
3
Unable to tune detector with the discriminate knob.
The Low Battery indicator light will come on and stay on whenever the
batteries need replacing. It should flash momentarily when the Power
Switch is turned on.
IMPORTANT:
Your Pioneer 505 metal detector requires two 9-Volt
ALKALINE
batteries.
Follow these steps to install the batteries.
●
1
Carefully remove the battery
compartment door by pressing
the release clip on the right side
of the door.
●
2
Snap one battery onto each of
the terminals and place the batter-
ies inside the compartment.
●
3
Replace the compartment door by
carefully inserting opposite side of clip
first. Then press down on clip side until
battery door snaps into place.
Release
Clip
DO NOT MIX OLD AND NEW BATTERIES
Summary of Contents for PIONEER 505
Page 18: ...NOTES 18 ...
