background image

7

OPERATING MODES AND CONTROLS

The Tracker II has Three Operating Modes

1

ALL-METALS

a. All metals are detected
b. Single tone response, regardless of metal type 
c. Maximum depth detection capability

Operating Controls

DISCRIMINATION knob does not apply

APPLICATIONS

Relic Hunting, Cache Hunting and general applications like 
property marker locating

2

TONE

a. Ferrous metals are automatically eliminated from detection.
b. Two-tone audio response classifies metals as illustrated:

c. Adjust the DISCRIMINATION Control when encountering low-tone

objects. If the Disc control can be adjusted to induce a broken (or 
scratchy) tone, the buried item is probably trash.  A broken tone 
can usually be achieved between the 12:00 and 2:00 positions. 

APPLICATIONS

Coin Shooting
Jewelry Hunting

3

DISC:

Full Discrimination  

a. Ferrous metals are automatically 

eliminated from detection.

b. Two-tone audio response classifies 

metals as illustrated above under
the Tone mode.

c. Adjust the DISCRIMINATION 

control knob to completely 
eliminate unwanted items from 
detection. Metals are eliminated 
from detection as illustrated:

TONE MODE AUDIO RESPONSES

NO

RESPONSE

Iron & Steel

LOW

TONE

Gold & Nickel

BROKEN

TONE

Old & New Pull Tabs

HIGH

TONE

Copper, Silver & Brass

Summary of Contents for Archeology Specialist Tracker II

















Reviews: