Boundaryline ELITEWALL ALUMINIUM SLAT, Install Manual

Page: 13 / 16

13
STEP-BY-STEP
GUIDE
0800 003 006 / boundaryline.co.nz
VERTICAL SLATS
SYSTEM
STEP 4 –
INSERTING TOP CHANNEL
STEP 5 –
MARKING OUT YOUR SLATS
To Establish the spacings of your vertical slats, measure from one edge of the outside slats to the same edge of the
other “out side slat” then divide this space up with the amount of slats you would like to have. (As shown below in
the image)
Once your outside slats have been secured in place, the top channel can now be cut and fitted neatly between the
posts.
The only place you can screw this in currently is the top 25mm of your side slats.
This should now complete the frame in which all your remainder slats can be fitted to.
Total length divided by 8 Slats
800mm
Bottom Support Slat
85 x 25 slats
15mm gap
s
100mm 100mm 100mm 100mm 100mm 100mm 100mm 100mm