10
STEP-BY-STEP
GUIDE
0800 003 006
/
boundaryline.co.nz
COVER CLIP
INSTALLATION
STEP 5 –
INSERT CHANNEL COVER CLIP
Once all your slats have been assembled you can now install the “Cover Clip”to the channel to hide all visible
fixings.
Make sure the cover clip is the same length as your Slat Channel then your ready to go.
The easiest way to do this is to use either a rubber mallet or the rubber handle of your hammer. Insert one edge of
the cover clip into the channel then with the rubber mallet/hammer handle from either the top or bottom, Tap the
other edge firmly, this will clip it into place. Work you way to the other end until it is all secured in place.
It is important that
the object you use
to tap the cover
clip in with won’t
damage the powder
coating.
Do not use the
metal part of your
hammer, this will
cause scratches or
dents.
!
IMPORTANT
