Screw in the 4x Socket
Set Screws. Ensure full
thread engagment.
B2
B3
Secure to the surface.
Locking nuts offer
greater security.
5
Install your Case as shown.
7
Install the Tablet Setup Kit. Each
kit is specific per tablet device and
Bouncepad Case.
9
Place the tablet into the
Case and connect to
power.
10
Locate and lock the
Faceplate to the Case.
A2
Lift & hold the
rubber screw
covers.
A3
Secure the Rotate to
the mounting surface,
then close the covers.
T20 Pin Torx
Driverbit
No.8 Countersunk,
self tapping Screw
M4x40mm
Socketset screw
Go to
step 5
A4
Go to
step 5
B4
M4 Wing nut
M4 Washer
M4 Washer
M4 Locking nut
T20 Pin Torx
Driverbit
M4x20mm
Buttonhead
screw
M4 Split
Washer
Case Washer
Unlock & remove the
Faceplate from the
Bouncepad Case.
6
4x Tablet Supports
1x Cable Clip
4x Corner Pieces
11
Installation is now
complete.
*We recommend recording the key number so
you can purchase additional keys in the future.
Key number here
Feed the tablet cable
through the Case and
mounting surface.
8
Tighten screw(s) using hand
tools, using electric tools may
damage your Bouncepad.
Tighten screw(s) using hand
tools, using electric tools may
damage your Bouncepad.
Tighten screw(s) using hand
tools, using electric tools may
damage your Bouncepad.
