MOBI BLOCK
INSTALLATION GUIDE
1.
Insert the straight end of the Micro USB
cable into the Block.
2.
Peel o
ff
the corners of the adhesive pad
backing.
3.
Position the Block on your card reader/
scanner and plug the right-angle end
of the cable into your device as detailed
overleaf
.
Ensure that the setup matches the
illustration exactly.
6.
Re-apply the Block on your card reader/
scanner as in Step 3. Press
fi
rmly for 10
seconds before use.
4.
Remove the block from your device, leaving
the cable plugged in.
5.
Peel o
ff
the remaining backing from the
adhesive pad
1.
BP-MOB-ART-00003_REV1
