BOUNCE MASTER 201806, Assembly, Installation, Care, Maintenance, And Use Instructions

Page: 23 / 37

22
Select two holes in the
middle of the top rail as
starting point.
For even distribution of
spring tension and ease of
assembly, the springs must
always be installed on
opposite sides of the frame
in an alternating manner, i.
g. 1
st
and 2
nd
, followed by
3
rd
and 4
th
as shown in
FIGURE 4 .
STEP 6-4 FOR 15FT
The number of triangle-rings sewn on the mat is equal to the number of holes in the frame. lf you
notice that you have miscounted a hole or triangle-ring, remove and reinstall the springs as necessary
while maintaining an even distribution of tension as explained above.
Please count carefully in the following steps. If you attach a spring incorrectly you can damage the
mat.
WARNING
Heavy gloves must be used to protect your hands from pinch points assembly and goggles
must be worn to avoid injuries to the eyes.
4
1
#13
#15
1st
2nd
4th
3rd
FIGURE 4