BouMatic Robotics MR-D1, Service Manual

Page: 285 / 446

Maintenance
Service: Continuation 3 and 7
23 June 2015 Version 1.7 Page 21-15
Steps To replace the wearing parts in the milk meter,
follow the steps in
Scheme 21-6 .
STEP ACTION
1. Remove the tubes (1) (see Figure 21-19 ) and hose (2) at the indicated
locations.
Figure 21-19 Removing tubes and hose
2. Unscrew the screw cap (3) (see Figure 21-19 ).
3. Replace the white silicon ring (1) (see Figure 21-20 ) which is situated
in the unscrewed screw cap.
Figure 21-20 Replacing silicon ring
4. Unscrew the screw cap (2) (see Figure 21-20 ).
1
2
3
1
2
3