BouMatic Robotics MR-D1, Service Manual

Page: 133 / 446

Operations from BRI
Setting stations
23 June 2015 Version 1.7 Page 11-7
STEP ACTION
The window for setting the milking box as selection unit contains the
next tab pages to set post selection:
Post selection left Sets post selection for cows that leave the
milking box through the left gate.
Post selection right Sets post selection for cows that leave the
milking box through the right gate.
Figure 11-5 Setting post selection
5. Open the tab page for the milking box side that is connected to the
post selection gate.
6. Specify the selection criteria (2) for the selection gate as follows:
 Switch on option selection off, if you don’t use the milking box as a
selection unit,
or
 Switch on one or more of the remaining selection criteria.
Refer to section 11.2 for a description of the selection criteria.
7. Repeat step 5 and 6 if you want to set the post selection gate that is
connected to the other side of the milking box.
8. Click the
SAVE
button (3) to save your settings.
Scheme 11-2 Setting post selection
1
2
3