Page 6
40245-0-0219
FIREPLACE PREPARATION (CONT'D)
CAUTION
Do not put pressure on glass inside the frame. Glass is
loose until secured after the installation.
6. Locate the inner glass-frame. With the bottom of the inner
glass-frame angled out towards the installer, hook the flange
of the inner glass-frame onto the top mount bracket. Center
the inner glass-frame, and bring the bottom of inner glass-
frame down to the fireplace. The bottom of the frame will
slide over the side brackets.
NOTE:
Suggest 2-person install.
U:\INSTRUCTIONS\Instructions Original Graphics\VFLB Outdoor Kit\EPS\Outdoor Glass Frame Assembly - 020719
1st
2nd
Figure 5
7.
Examine gasket along the side of the fireplace to verify the
seal is against the side mount brackets.
See
Figure 6.
Figure 6
8. Using four provided #10 x 1 inch screws, attach the bottom of
the inner glass-frame to the fireplace as shown in
Figure 7.
Figure 7
9. Remove the plastic covering the stainless on the exterior
decorative front.
10. Slide the outer glass and frame over the top and sides of the
fireplace.
See Figure 8.
NOTE:
Suggest 2-person install.
Figure 8