40245-0-0219
Page 5
FIREPLACE PREPARATION
NOTICE:
The exterior decorative front must be attached to the
fireplace before the unit has been installed into the framing.
PREPARING THE FIREPLACE
The exterior decorative front slides onto the top and sides of the
linear fireplace.
1.
Determine where the fireplace will be installed and which
side is to be the exterior side (side toward the outside of
the residence). Valve controls will be on the side of the
unit facing the inside living space. The opposite side of the
fireplace is the preferred side for the External Decorative
Front.
See Figure 1
for orientation of fireplace with pre
-
ferred side of External Decorative Front.
PREFERRED SIDE
OF OUTDOOR
INSTALLATION KIT
SIDE OF
FIREPLACE
JUNCTION BOX
LOCATED ON
THIS SIDE
Figure 1
2. Uncrate the fireplace using the instructions provided.
3. Locate top mount bracket shown in
Figure 2
and attach with
four provided #10 x ½ inch screws as shown.
NOTE:
This bracket mounts using the holes under the top flange
of the unit.
TOP MOUNTING BRACKET
Figure 2
4. Locate bottom mount bracket shown in
Figure 3
and attach
with four provided #10 x 1/2 inch screws as shown.
BOTTOM MOUNTING
BRACKET
Figure 3
5. Locate side mount brackets shown in
Figure 4
and attach
with four provided #10 x 1/2 inch screws as shown.
SIDE MOUNTING BRACKET
Figure 4