Problem: The bottom depth number is locked onto the surface.
• Severe interference caused by wind chop and air churned into the water can
sometimes fool the Buddy into giving a false bottom depth reading. Try turning on the
SCC (Surface Clutter Control).
Problem: The bottom depth number is locked onto a 2nd bottom.
• A strong second bottom can sometimes fool the Buddy into giving a false depth reading.
Try pulling the transducer out of the water for a few seconds, and then put it back. If the
condition persists, try lowering the gain and, if needed, manually set the range.
22
FB2202_English.qxp 3/14/2006 12:06 PM Page 23
