SCC
- The Surface Clutter Control reduces undesirable signals on the graph. Such signals may
include surface clutter (created by turbulence around the transducer), thermocline, air bubbles,
algae bloom, etc. Turn on SCC if these signals inhibit the display of the bottom.
NOTE:
Turning on the surface clutter control may inhibit shallow-water bottom readings.
ICE -
The ice fishing mode control overrides the screen clutter control and increases the gain
significantly to help display smaller objects. Although this improves the picture in most ice fishing
situations, it may increase clutter and is normally turned off for other types of fishing.
RANGE
- The bottom range control allows you to set how deep the bottom graph will display. The
bottom range is displayed in the upper-right corner of the graph.
In automatic mode, the Fishin’ Buddy™ 2202 sets the graph range to graph from the water surface
down to just below the bottom.
A
- This symbol in the upper-right corner of the display indicates automatic range mode.
You may want to set the range manually if the bottom reading becomes unreliable or if you are
only interested in seeing the top portion of the water. In this case, the
A
symbol will disappear
indicating that you set the range yourself.
In bottom-tracking mode, the Fishin’ Buddy™ 2202 sets the range to graph the 10 ft (3 m) of water
just above the bottom. This zoomed-in graph is useful for determining bottom features and for
marking fish lying close to the bottom.
B
- This symbol in the upper-right corner of the display indicates bottom-tracking mode.
• Operation:
Press and release
the
UP
or
DOWN
button to select automatic or bottom-
tracking mode, or
press and hold
UP
or
DOWN
to set a manual range.
9
FB2202_English.qxp 3/14/2006 12:06 PM Page 10
