Botex DMX DC-192, User Manual, Page: 31 / 56

5. Press [Tap/Disp] to switch between ‘PL.XX’ and ‘PH.XX’ . ‘PL.XX’ stands for the low byte or
fine channel, generally listed as the Pan Fine channel. ‘PL.XX’ stands for the high byte or
rough channel, generally listed as the Pan channel. Set ‘PH.XX’ , hold down [MODE] and
press then the [SCENE] button corresponding to the device's pan channel. For example,
if the device's pan channel is 1, you should press the [SCENE] button 1. Please refer to the
device's DMX table. If your device has a Pan-Fine channel, press [Tap/Disp] until the dis‐
play shows ‘PL.XX’ . Hold down [MODE] and press then the [SCENE] button corre‐
sponding to the device's pan channel. For example, if the device's pan channel is 2, you
should press the [SCENE] button 2.
6.
Press the scene bank UP / DOWN buttons to switch between ‘TL.XX’ and ‘TH.XX’ . ‘TL.XX’
stands for the low byte or fine channel, generally listed as the Tilt Fine channel. ‘TH.XX’
stands for the high byte or rough channel, generally listed as the Tilt channel. Set
‘TH.XX’ , hold down [MODE] and press then the [SCENE] button corresponding to the
device's tilt channel. For example, if the device's tilt channel is 3, you should press the
[SCENE] button 3. Please refer to the device's DMX table. If your device has a Tilt-Fine
channel, press [Tap/Disp] until the display shows ‘TL.XX’ . Hold down [MODE] and press
then the [SCENE] button corresponding to the device's tilt channel. For example, if the
device's tilt channel is 4, you should press the [SCENE] button 4.
7.
Hold down [Program] for about two seconds or until the PROG indicator stops flashing
on the display. As soon as the blackout indicator flashes, the programme mode is deacti‐
vated.
Operating
DMX DC-192
31
DMX controller