manualshive.com logo in svg

Botech BT-100 HD, User Manual

Share
Download
Botech BT-100 HD User Manual Download Page 42

40

6.8 EPG

Press the EPG button and the electronic channel guide appears if applicable.
Time intervals are arranged in a row and Channel lists are shown in a column.

6.8.1 EPG Information

1.

Press the /  button to change time interval.

2.

Press the

▲

/

▼

 button to watch the guide

about the channel, and then press the INFO
button, the detail EPG window will appear.

3.

Press the

 button to exit.

·

Press the Opt button to reserve channels with event. If you want to know the detail

Description about reservation, refer to the reservation description in chapter 5.4.2.

·

Press the INFO button to watch the detail EPG.

A.1

 Troubleshooting

There may be various reasons behind receiver problems. Check the receiver according to the
procedures described below.
If you can’t solve your problem even after following the troubleshooting procedures, please
contact the dealer. Do not open the receiver cover. It may cause a dangerous situation.

Symptom

Cause

Remedy

The front panel doesn’t
display any message.

The power cord is not plugged
in.

Check that the power cable is plugged in
to the wall outlet.

Wrong connection of the
Audio/Video output of the
receiver to TV.

Connect the Audio/Video output of the
receiver to TV correctly.

Wrong connection of the
antenna.

Connect the antennal cable correctly.

No picture or sound.

No or Bad signal message
appears.

Check other device connected between
Antenna and the receiver, or adjust the
antenna position.

Summary of Contents for BT-100 HD

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands