Botanicare SLIDE BENCH, Assembly Instructions Manual

Page: 9 / 30

Page | 9 Technical Support 1-888-808-4826
Determine layout distances
A. Drain Tray to Wall Spacing
Distance A
Enter desired spacing here + 5 1/8” =
B. Left Side Tray to Wall Minimum Spacing
(When bench is slid towards the wall)
Distance B
Enter desired minimal spacing here + _______ =
4’ bench add 19 1/4"
5’ bench add 25 1/4"
C. Bench to Bench Spacing
(17” aisle minimum)
Distance C
Enter desired aisle width here + _______ =
4’ bench to 4’ bench spacing add 31”
4’ bench to 5’ bench spacing add
37”
5’ bench to 5’ bench spacing add 43”
D. Distance “L” from Arch 1 leg mounting plate to the last arch mounting plate. Select from
the table based on the nominal bench length.
Bench Length Distance L Bench Length Distance L Bench Length Distance L
15’ 174” 45’ 534” 75’ 894”
20’ 234” 50’ 594” 80’ 954”
25’ 294” 55’ 654” 85’ 1014”
30’ 354” 60’ 714” 90’ 1074”
35’ 414” 65’ 774” 95’ 1134”
40’ 474” 70’ 834” 100’ 1194”
E. Distance A from the back wall, snap a chalk line along the back wall from left to right.
F. Distance B from the left wall, snap a chalk line along the left wall from back to front.
G. Distance C from the line created in step F, snap a parallel chalk line from back to front.
Repeat as necessary based on the number of benches to be installed in the room.
NOTE: Arches are nominally 60” from arch to arch. The last arch opposite the drain end, is a
short section and is only 54” apart.