DOC: BOS0295
User Manual PD301 Play Detector
4
2.1
Special Notice
SPECIAL NOTICE
To meet MoT testing specifications the PD301 play detector applies a very
considerable hydraulic forces to the steering components and bearings, in addition
to the play detector and it fixings. The PD301 is designed to provide long-life
performance with recommended periodic servicing.
The automatic mode should be used for several movements when required and not
run continuously. The LEFT, RIGHT and rotational manual movements should be
used only as required to provide adequate vehicle inspection. This will maintain
your play detector in excellent condition and ensures that vehicles are not affected
by applied lateral forces.
IMPORTANT:
Using the PD301 on a vehicle hoist supplied by any company other
than BOSTON GARAGE EQUIPMENT, or without written certification from BOSTON
GARAGE EQUIPMENT that the PD301 is suitable for that hoist, is considered
improper use.
♦
Appropriate training is required, prior to using or maintaining the PD301.
♦
The PD301 has a maximum load capacity of 1500 kg.
♦
If the PD301 is fitted to a vehicle hoist, it is important that the hoist is placed in
the ‘locked’ position prior to operation of the PD301, and not supported by the
steel ropes or other means. It is also important to check weekly that the floor
fixing bolts of the hoist are tight and in good condition.
♦
The unit should be kept clean and well maintained to protect against wear and ensure
good operation.
♦
Only a qualified technician should operate the PD301.
♦
The operator should follow procedures prescribed by national standards and the
regulations of Health and Safety.
♦
Keep the operating environment clean and free of oil and tools.