•
Using the #8 x 1 ¼” screws (smaller of the 2 sizes included), fasten each leg to
the seat
assembly (as shown below). It may be helpful to drill small pilot holes prior to fastening
the screws. Important Note: Be sure each leg is on the correct side. The larger pre-
drilled counter sunk holes should be on the outside, these are so the head of the screw
can be counter sunk and wood plugs be pushed in.
•
Next, fasten the triangular seat supports to the bottom of the seat assembly and legs,
using the same screws as in previous step (see below).
Summary of Contents for Pilot Seat
Page 6: ......
