2. Place the charger within your charging belt
•
Once sufficiently charged, remove the charger
from the base station. Before you place your
charger in your charging belt, make sure to
switch your charger on,
using the circular
power button
in the middle of the charger.
•
The
green indicator light
will show and the
charger will
beep in a steady continuous
rhythm.
Once the charger is correctly aligned
with your stimulator, the
beeping will stop.
•
Place the
charger
into the pouch of your
charger belt and place the belt around
your waist.
•
Adjust the straps on the belt so they are
loose enough for you to feel comfortable.
Make sure the
mesh fabric of your belt is
facing outwards.
3. Position the belt to align the
charger with your stimulator
•
Move the belt slightly up and down and from
side to side until the charger is
resting over
your stimulator.
If you need to, you can adjust
the length of the belt to the right size for you. When
correctly positioned the
continuous single beeps will stop.
•
Check the charger occasionally to ensure it’s
centered over your
stimulator.
If not centered properly, charging times may vary.
•
You know the stimulator is fully charged when you hear a
double
beep for a total of 60 seconds
and see that the
green indicator
light
has switched off. Although you don’t have to charge your
stimulator to 100% it can be helpful to know that your battery is
fully charged.
Tip:
Once your stimulator is charged, return your charger to the base
station. This ensures it will be fully charged for the next time you need it.
Then you’re all set!
8
9
