Boston Scientific Precision SC-9004-35, Directions For Use Manual

Page: 6 / 162

9055876-013 4 of 159
en
8. When connecting to one Medtronic quad Lead, one PCM1 is used. Connect the proximal
end of PCM1 to one port of the IPG. Plug the other port with the Port Plug supplied in the
IPG kit.
9. Programming: Since only the 4 distal Contacts are active, the Bionic Navigator ™ software
will show the inactive contacts with an “X” on them, indicating that they are not connected.
By selecting the appropriate Lead type in the Bionic Navigator, it will use only the 4 active
contacts for programming.
10. To program Leads, refer to the Programming Manual or Bionic Naivgator Software Guide
provided for your Spinal Cord Stimulator System.
Specifications and Technical Data
Precision Connector M1
Part Specifications
Connector Lengths 35, 55, 70 cm
Connector Diameter 1.3 mm
Number of Electrode
Contacts
4
Contact Material Platinum/Iridium
Insulation Material Polyurethane,
Silicone
Conductor Material MP35N